Prediction of Coal ash leaching behavior in acid mine water, comparison of laboratory and field studies [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 2005.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- vp : digital, PDF file
- Additional Creators:
- United States. Department of Energy. Savannah River Site
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- Strongly alkaline fluidized bed combustion ash is commonly used to control acid mine drainage in West Virginia coal mines. Objectives include acid neutralization and immobilization of the primary AMD pollutants: iron, aluminum and manganese. The process has been successful in controlling AMD though doubts remain regarding mobilization of other toxic elements present in the ash. In addition, AMD contains many toxic elements in low concentrations. And, each mine produces AMD of widely varying quality. So, predicting the effect of a particular ash on a given coal mine's drainage quality is of particular interest. In this chapter we compare the results of a site-specific ash leaching procedure with two large-scale field applications of FBC ash. The results suggested a high degree of predictability for roughly half of the 25 chemical parameters and poor predictability for the remainder. Of these, seven parameters were successfully predicted on both sites: acidity, Al, B, Ba, Fe, Ni and Zn while electrical conductivity, Ca, Cd, SO4, Pb and Sb were not successfully predicted on either site. Trends for the remaining elements: As, Ag, Be, Cu, Cr, Hg, Mg, Mn, pH, Se Tl and V were successfully predicted on one but not both mine sites.
- Published through SciTech Connect.
- Type of Report and Period Covered Note:
- Funding Information:
View MARC record | catkey: 13832512