POC-scale testing of oil agglomeration techniques and equipment for fine coal processing [electronic resource].
- Published:
- Washington, D.C. : United States. Dept. of Energy, 1998.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description:
- 33 pages : digital, PDF file
- Additional Creators:
- Federal Energy Technology Center (U.S.), United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access:
- Free-to-read Unrestricted online access
- Summary:
- This report covers the technical progress achieved from April 1, 1998 to June 30, 1998 on the POC-Scale Testing of Oil Agglomeration Techniques and Equipment for Fine Coal Processing. Continuous bench-scale runs were carried out with Luscar Mine coal. The main objectives were to optimize process conditions for a proposed jet processor and to compare its performance with a standard high-shear mixer. A total of three runs consisted of 15 testing periods was carried out. Both conditioning devices performed very well with combustible matter recovery exceeding 96%. Slightly higher coal recovery was observed for high-shear mixer, while lower ash contents were achieved when jet processor was used for coal conditioning. During the current reporting period work has been continued and completed on the engineering and design package of a 3 t/h POC-scale agglomeration unit. Preliminary design package prepared by Thermo Design Engineering, a subcontractor to this project, was submitted to DOE for revision and approval.
- Report Numbers:
- E 1.99:de-ac22-95pc95152--08
de-ac22-95pc95152--08 - Subject(s):
- Other Subject(s):
- Note:
- Published through SciTech Connect.
08/01/1998.
"de-ac22-95pc95152--08"
K. Szymocha; W. Pawlak. - Funding Information:
- AC22-95PC95152
View MARC record | catkey: 13833140