High-temperature, solid oxide electrolyte fuel cell power generating system. Annual report, June 1, 1980-May 31, 1981 [electronic resource].

Published:: Pittsburgh, Pa. : Westinghouse Electric Corporation, 1981.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description:: Pages: 114 : digital, PDF file
Additional Creators:: Westinghouse Electric Corporation and United States. Department of Energy. Office of Scientific and Technical Information

Access Online

www.osti.gov

Availability

Finding items...

Restrictions on Access:

Free-to-read Unrestricted online access

Summary:

Closed-end tubes are now being prepared in-house, for use in fabricating and evaluating the FBA cell design. New perovskite-type mixed oxides are being investigated as air electrode materials and some have been identified and are being used in FBA cell test evaluation studies. Initial FBA cells have been fabricated and tested. Although their performance is below target goals, fabrication procedures for all fuel cell components have been verified for cell construction. Areas of investigation for FBA cell performance improvement have been identified and work is proceeding in these areas. Variable-length cells in the series-cell stack design have demonstrated high (85%) fuel utilization with good performance (0.57 anti V at 400 mA/cm/sup 2/ average, simulated coal derived fuel, 1000/sup 0/C).

Report Numbers:

E 1.99:doe/et/17089-5
doe/et/17089-5

Subject(s):

Direct Energy Conversion

Other Subject(s):

Note:

Published through SciTech Connect.
10/14/1981.
"doe/et/17089-5"
"DE84016278"
Not Available.

Funding Information:

AC02-80ET17089

View MARC record | catkey: 14068592