Actions for Measured energy savings from using night temperature setback [electronic resource].
Measured energy savings from using night temperature setback [electronic resource].
- Published
- Washington, D.C. : United States. Dept. of Energy, 1993.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- 21 pages : digital, PDF file
- Additional Creators
- Pacific Northwest Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- The measured energy savings resulting from using night temperature setback in typical light-construction wooden office buildings was determined. Researchers installed monitoring equipment in a six-building sample of two-story wooden buildings at Fort Devens, Massachusetts. Data obtained during both single-setting and night-setback operating modes were used to develop models of each building`s heat consumption as a function of the difference between inside and outside temperature. These models were used to estimate seasonal savings that could be obtained from the use of night-setback thermostat control. The measured savings in heating energy from using night temperature setback for the six Fort Devens buildings ranged from 14% to 25%; the mean savings was 19.2%. Based on an energy cost of $0.65/therm of natural gas, the estimated average cost savings of using automatic setback thermostats in these buildings is $780 per year per building.
- Report Numbers
- E 1.99:pnl--8488
pnl--8488 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
01/01/1993.
"pnl--8488"
"DE93006627"
Szydlowski, R.F.; Wrench, L.E.; Paton, J.B.; O`Neill, P.J. - Type of Report and Period Covered Note
- Topical; 01/01/1993 - 01/01/1993
- Funding Information
- AC06-76RL01830
View MARC record | catkey: 14076893