Actions for Implementation plan for the demonstration of a 50,000 ft
Implementation plan for the demonstration of a 50,000 ft/sup 2/ solar hot water system for the textile industry. Final report [electronic resource].
- Published
- Clemson, S.C. : Clemson University. College of Engineering, 1980.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- Pages: 153 : digital, PDF file
- Additional Creators
- Clemson University. College of Engineering and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- An analysis of textile processes was conducted to determine their applicability to integration into a 50,000 ft/sup 2/ collector field and into a waste heat recovery system. Various processes in a typical carpet finishing plant, a typical cotton/cotton blend finishing plant, and a typical 100% synthetic fabric pressurized beck finishing plant are analyzed. The flat-plate, evacuated tube, and parabolic concentrator are discussed and evaluated. Evaluations of direct heat exchange, closed cycle enhanced recovery, and open cycle enhanced heat recovery techniques as applied to textile processes are presented. Conceptual designs are discussed that use a solar array to produce hot water and use standard boilers to produce process steam and to augment the hot water output when insolation values are insufficient to meet process demands. Conceptual designs and cost estimates are presented for: process water systems with evacuated tube solar collectors; process water system with concentrating-tracking solar collectors; feedwater system with concentrating-tracking solar collectors; templifier and direct exchange waste heat recovery system; direct heat recovery systems; integrated system using enhanced heat recovery and concentrating-tracking solar collectors; integrated system using direct heat recovery and concentrating-tracking solar collectors; integrated system using direct heat recovery, evacuated tube solar collectors and concentrating-tracking solar collectors; and integrated system using enhanced heat recovery, evacuated tube collectors, and concentrating-tracking source collectors. An economic evaluation of the systems is presented using the rate of return method. Results and recommendations are summarized. (MCW)
- Report Numbers
- E 1.99:doe/cs/31744-2
doe/cs/31744-2 - Subject(s)
- Other Subject(s)
- Heat Recovery Equipment
- Comparative Evaluations
- Solar Collectors
- Economic Analysis
- Technology Assessment
- Solar Process Heat
- Demonstration Programs
- Textile Industry
- Waste Heat Utilization
- Concentrating Collectors
- Data Compilation
- Design
- Dyes
- Energy Conservation
- Evacuated Tube Collectors
- Evaluation
- Feasibility Studies
- Flat Plate Collectors
- Heat Recovery
- Interfaces
- Life-Cycle Cost
- Parabolic Reflectors
- Solar Concentrators
- Solar Heating Systems
- Solar Water Heaters
- Textiles
- Appliances
- Cost
- Data
- Economics
- Energy
- Energy Recovery
- Equipment
- Evacuated Collectors
- Heat
- Heaters
- Heating Systems
- Industry
- Information
- Numerical Data
- Process Heat
- Recovery
- Solar Equipment
- Solar Reflectors
- Waste Product Utilization
- Water Heaters
- Note
- Published through SciTech Connect.
08/01/1980.
"doe/cs/31744-2"
Beasley, D.E.; Hester, J.C.; Rogers, W.A. Jr. - Funding Information
- AS07-78CS31744
View MARC record | catkey: 14081981