Actions for Design Optimization of Radionuclide Nano-Scale Batteries [electronic resource].

Email RIS file
Bookmark
Report an Issue

Design Optimization of Radionuclide Nano-Scale Batteries [electronic resource].

Published
Gainesville, Fla. : University of Florida, 2004.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
vp : digital, PDF file
Additional Creators
University of Florida and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Radioisotopes have been used for power sources in heart pacemakers and space applications dating back to the 50's. Two key properties of radioisotope power sources are high energy density and long half-life compared to chemical batteries. The tritium battery used in heart pacemakers exceeds 500 mW-hr, and is being evaluated by the University of Florida for feasibility as a MEMS (MicroElectroMechanical Systems) power source. Conversion of radioisotope sources into electrical power within the constraints of nano-scale dimensions requires cutting-edge technologies and novel approaches. Some advances evolving in the III-V and II-IV semiconductor families have led to a broader consideration of radioisotopes rather free of radiation damage limitations. Their properties can lead to novel battery configurations designed to convert externally located emissions from a highly radioactive environment. This paper presents results for the analytical computational assisted design and modeling of semiconductor prototype nano-scale radioisotope nuclear batteries from MCNP and EGS programs. The analysis evaluated proposed designs and was used to guide the selection of appropriate geometries, material properties, and specific activities to attain power requirements for the MEMS batteries. Plans utilizing high specific activity radioisotopes were assessed in the investigation of designs employing multiple conversion cells and graded junctions with varying band gap properties. Voltage increases sought by serial combination of VOC s are proposed to overcome some of the limitations of a low power density. The power density is directly dependent on the total active areas.
Report Numbers
E 1.99:840305
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
10/06/2004.
Americas Nuclear Energy Symposium (ANES 2004), Miami, FL (US), 10/03/2004--10/06/2004.
Wang, J.; Smith, B.; Tulenko, J.S.; Schoenfeld, D.W.
View MARC record | catkey: 14091339