Email RIS file
Bookmark
Report an Issue

IMPROVEMENT OF WEAR COMPONENT'S PERFORMANCE BY UTILIZING ADVANCED MATERIALS AND NEW MANUFACTURING TECHNOLOGIES [electronic resource] : CASTCON PROCESS FOR MINING APPLICATIONS

Published
Washington, D.C. : United States. Dept. of Energy, 2001.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
11 pages : digital, PDF file
Additional Creators
United States. Department of Energy and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
The microstructure and mechanical properties of a specimen HIPped at 1100 C under 60 ksi were examined. The examinations indicated that the proper HIPping temperature for this material should be higher than 1100 C. New recipe of monolithic material was developed and presented better extrusion homogeneity and less binder removal defects. However, cracking still occurred in specimens although very slow heating rate of 0.25 C/min for binder burnout was used.
Report Numbers
E 1.99:fc26-01nt41055--04
fc26-01nt41055--04
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
12/31/2001.
"fc26-01nt41055--04"
Xiaodi Huang; Richard Gertsch.
National Energy Technology Lab., Pittsburgh, PA (US)
National Energy Technology Lab., Morgantown, WV (US)
Funding Information
FC26-01NT41055
View MARC record | catkey: 14106894