Development of nondestructive evaluation methods for structural ceramics [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1996. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 12 pages : digital, PDF file
- Additional Creators:
- Argonne National Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- Nondestructive evaluation (NDE) methods using three-dimensional microfocus X-ray computed tomographic imaging (3DXCT) were employed to map axial and radial density variations in hot-gas filters and heat exchanger tubes. 3D XCT analysis was conducted on (a) two 38-mm-OD, 6.5-mm wall, SiC/SiC heat exchanger tubes infiltrated by CVI; (b) eight 10 cm diam. oxide/oxide heat exchanger tubes; and (c) one 26-cm-long Nextel fiber/SiC matrix hot-gas filter. The results show that radial and axial density uniformity as well as porosity, can be assessed by 3D XCT. NDE methods are also under development to assess thermal barrier coatings which are under development as methods to protect gas-turbine first-stage hot section metallic substrates. Further, because both shop and field joining of CFCC materials will be necessary, work is now beginning on development of NDE methods for joining.
- Published through SciTech Connect., 04/01/1996., "anl/et/cp--89900", " conf-9605167--4", "DE96011124", 10. annual conference on fossil energy materials, Knoxville, TN (United States), 14-16 May 1996., and Wilson, J.A.; Ellingson, W.A.; Koehl, R.D.; Stuckey, J.B.; Engel, H.P.
- Funding Information:
View MARC record | catkey: 14111315