Colling Wipe Samples for VX Analysis [electronic resource].
- Published
- Washington, D.C. : United States. Dept. of Energy, 2010.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- PDF-file: 8 pages; size: 0.6 Mbytes
- Additional Creators
- Lawrence Berkeley National Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- This standard operating procedure (SOP) provides uniform procedures for the collection of wipe samples of VX residues from surfaces. Personnel may use this procedure to collect and handle wipe samples in the field. Various surfaces, including building materials (wood, metal, tile, vinyl, etc.) and equipment, may be sampled based on this procedure. The purpose of such sampling is to determine whether or not the relevant surfaces are contaminated, to determine the extent of their contamination, to evaluate the effectiveness of decontamination procedures, and to determine the amount of contaminant that might present as a contact hazard.
- Report Numbers
- E 1.99:llnl-tr-424141
llnl-tr-424141 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
02/11/2010.
"llnl-tr-424141"
Koester, C; Hoppes, W G. - Funding Information
- W-7405-ENG-48
View MARC record | catkey: 14129368