Actions for Intense Laser - Electron Beam Interactions [electronic resource].

Email RIS file
Bookmark
Report an Issue

Intense Laser - Electron Beam Interactions [electronic resource].

Published
Washington, D.C : United States. Dept. of Energy. Office of the Assistant Secretary for Defense Programs, 2000.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
3,650 Kilobytes pages : digital, PDF file
Additional Creators
Lawrence Livermore National Laboratory, United States. Department of Energy. Office of the Assistant Secretary for Defense Programs, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Applicants seeking a Certificate of Compliance for an Independent Spent Fuel Storage Installation (ISFSI) cask must evaluate the consequences of a handling accident resulting in a drop or tip-over of the cask onto a concrete storage pad. As a result, analytical modeling approaches that might be used to evaluate the impact of cylindrical containers onto concrete pads are needed. One such approach, described and benchmarked in NUREG/CR-6608,¹ consists of a dynamic finite element analysis using a concrete material model available in DYNA3D² and in LS-DYNA,³ together with a method for post-processing the analysis results to calculate the deceleration of a solid steel billet when subjected to a drop or tip-over onto a concrete storage pad. The analysis approach described in NUREG/CR-6608 gives a good correlation of analysis and test results. The material model used for the concrete in the analyses in NUREG/CR-6608 is, however, somewhat troublesome to use, requiring a number of material constants which are difficult to obtain. Because of this a simpler approach, which adequately evaluates the impact of cylindrical containers onto concrete pads, is sought. Since finite element modeling of metals, and in particular carbon and stainless steel, is routinely and accurately accomplished with a number of finite element codes, the current task involves a literature search for and a discussion of available concrete models used in finite element codes. The goal is to find a balance between a concrete material model with a limited number of required material parameters which are readily obtainable, and a more complex model which is capable of accurately representing the complex behavior of the concrete storage pad under impact conditions. The purpose of this effort is to find the simplest possible way to analytically represent the storage cask deceleration during a cask tip-over or a cask drop onto a concrete storage pad. This report is divided into three sections. The Section II provides a summary of the literature search on concrete finite element models. The Section III discusses commercial codes. The Section IV provides recommendations.
Report Numbers
E 1.99:ucrl-id-137761
ucrl-id-137761
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
02/25/2000.
"ucrl-id-137761"
Cowan, T.; Ditmire, T.; LeSage, G.
Type of Report and Period Covered Note
Topical;
Funding Information
W-7405-Eng-48
View MARC record | catkey: 14353136