Actions for Analysis of CMX hydraulic data for the Mark 22 [electronic resource].

Email RIS file
Bookmark
Report an Issue

Analysis of CMX hydraulic data for the Mark 22 [electronic resource].

Published
Washington, D.C. : United States. Dept. of Energy, 1988.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Additional Creators
United States. Department of Energy and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
The original CMX hydraulic data for the Mark 22 assembly, obtained by L.W. Ridenhour in 1972, is analyzed and documented. Comparisons are made to Ridenhour's working notebooks and summary document, and to the Mark 22 hydraulics manual. Several errors in these documents are corrected. Correlations are given in a form suitable for revisions to the hydraulics manual. The experimental setup and measurements are briefly described, and the original data is compiled in the appendix to this report. An error in the recorded length between channel pressure taps was found in Ridenhour's notebook. This error impacts the channel pressure drop correlations obtained by Ridenhour and used in the hydraulics manual. The hydraulics of the two purge channels are analyzed based on the geometry of the orifices and on the limited data available. The limited data is shown to be in reasonable agreement with accepted orifice correlations. Purge channel correlations are given, and the purge channel flow splits are shown to be about 1.5% of the total flow.
Report Numbers
E 1.99:dpst-88-975
dpst-88-975
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
12/16/1988.
"dpst-88-975"
"DE92019923"
Koffman, L.D.
Du Pont de Nemours (E.I.) and Co., Aiken, SC (United States). Savannah River Lab.
Funding Information
AC09-76SR00001
AC09-89SR18035
View MARC record | catkey: 14367850