Technical Work Plan for [electronic resource] : Additional Multoscale Thermohydrologic Modeling
- Washington, D.C. : United States. Dept. of Energy, 2006.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Additional Creators:
- United States. Department of Energy. Yucca Mountain Project Office, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The primary objective of Revision 04 of the MSTHM report is to provide TSPA with revised repository-wide MSTHM analyses that incorporate updated percolation flux distributions, revised hydrologic properties, updated IEDs, and information pertaining to the emplacement of transport, aging, and disposal (TAD) canisters. The updated design information is primarily related to the incorporation of TAD canisters, but also includes updates related to superseded IEDs describing emplacement drift cross-sectional geometry and layout. The intended use of the results of Revision 04 of the MSTHM report, as described in this TWP, is to predict the evolution of TH conditions (temperature, relative humidity, liquid-phase saturation, and liquid-phase flux) at specified locations within emplacement drifts and in the adjoining near-field host rock along all emplacement drifts throughout the repository. This information directly supports the TSPA for the nominal and seismic scenarios. The revised repository-wide analyses are required to incorporate updated parameters and design information and to extend those analyses out to 1,000,000 years. Note that the previous MSTHM analyses reported in Revision 03 of Multiscale Thermohydrologic Model (BSC 2005 [DIRS 173944]) only extend out to 20,000 years. The updated parameters are the percolation flux distributions, including incorporation of post-10,000-year distributions, and updated calibrated hydrologic property values for the host-rock units. The applied calibrated hydrologic properties will be an updated version of those available in Calibrated Properties Model (BSC 2004 [DIRS 169857]). These updated properties will be documented in an Appendix of Revision 03 of UZ Flow Models and Submodels (BSC 2004 [DIRS 169861]). The updated calibrated properties are applied because they represent the latest available information. The reasonableness of applying the updated calibrated' properties to the prediction of near-fieldin-drift TH conditions will be evaluated and justified. Some of this evaluation will be conducted in conjunction with the post-model development validation activity involving comparisons of predicted TH conditions with measured TH conditions in the DST. The expected result is that, consistent with what was found in Revision 03 of Multiscale Thermohydrologic Model (BSC 2005 [DIRS 173944], Section 6.3.9), near-field/in-drift TH behavior is insensitive to a wide range of host-rock hydrologic property values. It is the intention of the work described in this TWP to propagate the new infiltration fluxes from the replacement infiltration model, by using the percolation fluxes from the revised site-scale unsaturated zone (UZ) flow model that has applied those new infiltration fluxes. The percolation flux distributions will be obtained from the updated site-scale UZ flow model, which has applied updated infiltration flux maps. Another objective of the work scope is to develop, implement, and validate a revised TH submodel-construction approach. This revised approach utilizes interpolation among a set of generic LDTH submodels that are run for a range of percolation flux histories that cover a sufficiently broad range of infiltration flux uncertainty, as well as for four host-rock units (two lithophysal units and two nonlithophysal units), and for three thermal property sets (low, mean, and high). A key motivation for this revised LDTH submodel-construction approach is to enable the MSTHM to be more flexible in addressing a broad range of infiltration flux cases. This approach allows the generic LDTH submodel simulations to be conducted prior to receiving percolation flux maps.
- Report Numbers:
- E 1.99:twp-mgr-pa-000036, rev 02
twp-mgr-pa-000036, rev 02
- Other Subject(s):
- Published through SciTech Connect.
"twp-mgr-pa-000036, rev 02"
"DOC.20060825.0001, DC# 48670"
View MARC record | catkey: 14379097