Drilling plan [electronic resource] : Raft river geothermal exploratory hole No. 3.
- Published
- Washington, D.C. : United States. Energy Research and Development Administration, 1976.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- Pages: 47 : digital, PDF file
- Additional Creators
- United States. Energy Research and Development Administration and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- The program, plans, and procedures to be used in drilling and completion of the Raft River Geothermal Exploratory Hole No. 3(RRGE-3) are described. RRGE-3 will be located in the Raft River valley of south central Idaho, southeast of Burley, and approximately 16 miles south of Malta, Idaho. The third exploratory hole will be drilled to provide data to further investigate and evaluate the geothermal reservoir, as well as to optimize the location of possible future resource and/or injection wells, and to develop methods to reduce the cost of geothermal wells. Plans call for drilling to a total depth of approximately 6,000 ft., or to the depth at which it is either indicated from temperature and test flow data and from logs that an acceptable hot water resource is available or that the hole is accepted as a possible reinjection well. (LBS)
- Report Numbers
- E 1.99:nvo-170
E 1.99: ido-10064
ido-10064
nvo-170 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
02/01/1976.
"nvo-170"
" ido-10064"
Not Available.
View MARC record | catkey: 14387681