Can a Pb/SCIFI calorimeter survive the SSC [electronic resource].
- Washington, D.C : United States. Dept. of Energy. Office of Energy Research, 1990.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: (12 pages) : digital, PDF file
- Additional Creators:
- University of Illinois at Urbana-Champaign
United States. Department of Energy. Office of Energy Research
National Science Foundation (U.S.)
United States. Department of Energy. Office of Scientific and Technical Information
- A scintillating fiber based electromagnetic calorimeter module built from radiation-hard materials has been tested in a beam capable of delivering both low and high currents of monoenergetic electrons. Energy resolution and light output measurements were made following high-dose exposures. The procedure was repeated until the resolution of the detector decreased from an initial value of 6.9%√E to 14.0%√E and the pulse height dropped by a factor of 11. After four weeks, the detector was retested. Partial recovery was observed in the light output which returned to approximately 52% of its original value. The resolution recovered to a value of 8.8%√E. The tests are described. 9 refs., 4 figs.
- Published through SciTech Connect.
": PHY 89 21146"
Workshop on radiation hardness of plastic scintillator, Tallahassee, FL (USA), 19-21 Mar 1990.
Johnson, K.F.; Hughes, S.A.; Majewski, S.; Zorn, C.; Tayloe, R.L.; Reimer, P.E.; Hertzog, D.W.; Zorn, M.
- Funding Information:
View MARC record | catkey: 14401813