Y-12 Development Organization technical progress report. Metal process, Part 3 [electronic resource].

Published:: Washington, D.C. : United States. Dept. of Energy, 1996.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description:: 17 pages : digital, PDF file
Additional Creators:: United States. Department of Energy and United States. Department of Energy. Office of Scientific and Technical Information

Access Online

www.osti.gov

Availability

Finding items...

Restrictions on Access:

Free-to-read Unrestricted online access

Summary:

Clad vent set (CVS) cups were ground in the closure-weld zone to reduce the wall-thickness variation created by the cup deep-drawing process. A significantly more uniform wall thickness would be beneficial for the CVS closure-weld operation. The goal was to reduce the average within-cup wall-thickness variation (defined as the range of wall thicknesses in the closure-weld zone) approximately 50% from the Cassini production value of 42 μm. This goal was shown to be achievable but, unfortunately, not with the existing blank and formed cup thicknesses.

Report Numbers:

E 1.99:y--2472-3
y--2472-3

Subject(s):

Other Subject(s):

Note:

Published through SciTech Connect.
04/01/1996.
"y--2472-3"
"DE97000703"
Northcutt, W.G. Jr.
Oak Ridge Y-12 Plant, TN (United States)

Funding Information:

AC05-84OR21400

View MARC record | catkey: 14403815