Hanford Tanks 241-C-203 and 241-C-204 [electronic resource] : Residual Waste Contaminant Release Model and Supporting Data
- Washington, D.C. : United States. Dept. of Energy, 2004.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Additional Creators:
- Pacific Northwest National Laboratory (U.S.)
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- This report describes the development of release models for key contaminants that are present in residual sludge remaining after closure of Hanford Tanks 241-C-203 (C-203) and 241-C-204 (C-204). The release models were developed from data generated by laboratory characterization and testing of samples from these two tanks. Key results from this work are (1) future releases from the tanks of the primary contaminants of concern (99Tc and 238U) can be represented by relatively simple solubility relationships between infiltrating water and solid phases containing the contaminants; and (2) high percentages of technetium-99 in the sludges (20 wt% in C-203 and 75 wt% in C-204) are not readily water leachable, and, in fact, are very recalcitrant. This is similar to results found in related studies of sludges from Tank AY-102. These release models are being developed to support the tank closure risk assessments performed by CH2M HILL Hanford Group, Inc., for the U.S. Department of Energy.
- Published through SciTech Connect.
Krupka, Kenneth M.; Schaef, Herbert T.; Brown, Christopher F.; Cantrell, Kirk J.; Lindberg, Michael J.; Deutsch, William J.
- Funding Information:
View MARC record | catkey: 14409155