Low-Activity Waste and High-Level Waste Feed Processing Data Quality Objectives [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1999.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 119 pages : digital, PDF file
- Additional Creators:
- Pacific Northwest National Laboratory (U.S.)
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- This document describes characterization needs for the DOE waste feed processing and disposal management of TWRS Privatization Phase I. The DOE must obtain information to evaluate and minimize risk associated with the private contractor's design phase deliverables (April 2000); authorization to proceed with Part B-2 (August 2000); and start of treatment facility construction (July 2001). Additionally, the DOE must ensure that the contract feed and product specifications are adequate and achievable, and that there is a sufficient basis for negotiating the price for. services. The purpose of this Data Quality Objective (DQO) is to provide data to accomplish the following: (1) update waste characterization information from source tanks to provide an independent assessment that the specifications and Interface Control Documents (ICDS) are adequate for DOE's management of the site M&I contractor and private contractor contracts; (2) provide preliminary information for the private contractor's process and facility designs and DOE's review of the designs in preparation for the authorization to proceed with Phase I Part B-2; (3) provide preliminary information for ILAW and IHLW storage and disposal design/specifications; (4) support update of the ILAW performance assessment (PA) for disposal; (5) help substantiate the ability to (1) comply with U.S. Nuclear Regulatory Commission (NRC) guidelines for incidental waste for LAW and (2) comply with the Office of Civilian Radioactive Waste Management (OCRWM) requirements for disposal of IHLW. The sampling and characterization implemented as a result of this DQO will be used for planning. As a result, a majority of the alternative actions fall into two major categories: either the DOE Privatization Contract is renegotiated or the process/facility designs are adjusted to accommodate increased capacity requirements, new technologies, additional waste stream volumes, etc. Impacts to the DOE are reduced when the need for these fallback positions are realized or eliminated early in the planning process. This DQO replaces earlier separate low-activity waste feed data quality objectives (Truex and Wiemers 1998) and high-level waste feed data quality objectives documents (Wiemers et,al. 1998). This combined DQO updates the data requirements based on the TWRS Privatization Contact issued August 1998 (DOE-RL 1998). Regulatory compliance for TWRS Privatization is addressed in a separate DQO (Wiemers et al. 1998). Additional characterization of the Phase I waste feed will be performed by DOE's contractors: the M&I contractor and the private contractor. Characterization for feed certification and waste acceptance will be completed before transfer of the feed to the private contractor facility. Characterization requirements for staged feed will be identified in other DQOS consistent with the Feed Certification Plans, ICDS 19 and 20, and applicable permits. Newly obtained analytical data and contract changes that have become available in parallel with or subsequent to preparation of this DQO update will be assessed and incorporated into the data needs optimization in the next revision of this DQO. Data available at the time of the tank waste sample request will be considered in the development of the Tank Sampling and Analysis Plan.
- Published through SciTech Connect.
Truex, Michael J.; Patello, Gertrude K.; Wiemers, Karyn D.
- Funding Information:
View MARC record | catkey: 14413047