Thermomechanical processing of 5083 aluminum to increase strength without increasing susceptibility to stress corrosion cracking [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1980.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: 28 : digital, PDF file
- Additional Creators:
- Rockwell International
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- 5083 aluminium with 25% cold work must be processed above 215/sup 0/C or below 70/sup 0/C to avoid forming continuous precipitate in the grain boundaries which makes the material susceptible to stress corrosion cracking. Time at temperature above 215/sup 0/C should be held to minimum (less than 30 min) to retain some strength from the 25% cold work.
- Published through SciTech Connect.
Edstrom, C. M.; Blakeslee, J. J.
- Funding Information:
View MARC record | catkey: 14459995