Actions for High density sintering of iron-carbon alloys via transient liquid phase [electronic resource].

Email RIS file
Bookmark
Report an Issue

High density sintering of iron-carbon alloys via transient liquid phase [electronic resource].

Published
Berkeley, Calif. : University of California, Berkeley, 1978.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
Pages: 45 : digital, PDF file
Additional Creators
University of California, Berkeley and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Because of the transient presence of a liquid phase during sintering of graphite coated iron powder, a high percentage (95% to approx. 99.4%) of theoretical density can be achieved in a short time (approx. 10 min.) and at a moderate temperature (1175/sup 0/C). As a result, the mechanical properties of the graphite coated sintered steel are close to those of commercial plain carbon steels and much better than those of commercial powder metallurgy sintered steels. In addition, the physical and mechanical properties of Fe 2% C 20% W were studied in the as-sintered condition.
Report Numbers
E 1.99:lbl-8001
lbl-8001
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
06/01/1978.
"lbl-8001"
Lam, T.T.
Funding Information
W-7405-ENG-48
View MARC record | catkey: 14462075