Elevated temperature cyclic deformation of stainless-steel and interaction effects with other modes of deformation [electronic resource].
- Argonne, Ill. : Argonne National Laboratory, 1976. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: 6 : digital, PDF file
- Additional Creators:
- Argonne National Laboratory and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- Since pertinent information concerning the deformation history of a material is stored in its current structure, an attempt has been made to determine the number of state variables necessary to uniquely describe the material's present condition. An experimental program has been carried out to determine the number of state variables which is required to describe the tensile test, cyclic, and creep behavior of 304 stainless steel at elevated temperature. Tests have been conducted at 300/sup 0/C and 560/sup 0/C which correspond to homologous temperatures of /sup 1///sub 3/ and /sup 1///sub 2/, respectively. The experiments consisted of subjecting samples to deformation histories during which the mode of deformation was changed so that two material responses could be measured for the same state of the material. Results strongly suggest that at least two state variables are necessary. (SDF)
- Published through SciTech Connect., 01/01/1976., "conf-760819-16", 2. international conference on the mechanical behavior of materials, Federation of Materials Societies, Boston, MA, USA, 16 Aug 1976., and Turner, A.P.L.
- Funding Information:
View MARC record | catkey: 14462643