Light production at an explosive/air interface. Period covered [electronic resource] : October--December 1976
- Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 1976.
- Physical Description:
- Pages: 10 : digital, PDF file
- Additional Creators:
- United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- Detonation front arrival time measurements are compared for an optoelectronic and an antenna technique. Fiber optics and photodiodes are used for the optoelectronic method while the antenna technique depends on radiated signals at an explosive/air interface. Analysis indicates that signals measured by the respective techniques are not caused by the same physical mechanism; thus, even though the results are not directly comparable the signals should be self-consistent for a given technique. The optical signals were found to have greater jitter in time and larger variation in magnitude than those signals obtained by the antenna technique.
- Report Numbers:
- E 1.99:mhsmp-77-5j
- Other Subject(s):
- Published through SciTech Connect.
Mason and Hanger-Silas Mason Co., Inc., Amarillo, Tex. (USA)
- Funding Information:
View MARC record | catkey: 14657416