Options for an 11 GeV RF Beam Separator for the Jefferson Lab CEBAF Upgrade [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Science, 2009. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Additional Creators:
- Thomas Jefferson National Accelerator Facility (U.S.), United States. Department of Energy. Office of Science, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The CEBAF accelerator at Jefferson Lab has had, since first demonstration in 1996, the ability to deliver a 5-pass electron beam to experimental halls (A, B, and C) simultaneously. This capability was provided by a set of three, room temperature 499 MHz rf separators in the 5th pass beamline. The separator was two-rod, TEM mode type resonator, which has a high shunt impedance. The maximum rf power to deflect the 6 GeV beams was about 3.4kW. The 12 GeV baseline design does not preserve the capability of separating the 5th pass, 11 GeV beam for the 3 existing halls. Several options for restoring this capability, including extension of the present room temperature system or a new superconducting design in combination with magnetic systems, are under investigation and are presented.
- Published through SciTech Connect., 05/01/2009., "jlab-acp-09-1044", " doe/or/23177-1697", PAC 2009, 4-8 May 2009, Vancouver, British Columbia, Canada., and Jean Delayen, Michael Spata, Haipeng Wan.
- Funding Information:
View MARC record | catkey: 14678080