The RF Design of an HOM Polarized RF Gun for the ILC [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 2006.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 3 pages : digital, PDF file
- Additional Creators:
- Stanford Linear Accelerator Center
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- The ILC requires a polarized electron beam. While a highly polarized beam can be produced by a GaAs-type cathode in a DC gun of the type currently in use at SLAC, JLAB and elsewhere, the ILC injector system can be simplified and made more efficient if a GaAs-type cathode can be combined with a low emittance RF gun. Since this type of cathode is known to be extremely sensitive to vacuum contamination including back bombardment by electrons and ions, any successful polarized RF gun must have a significantly improved operating vacuum compared to existing RF guns. We present a new RF design for an L-Band normal conducting (NC) RF gun for the ILC polarized electron source. This design incorporates a higher order mode (HOM) structure, whose chief virtue in this application is an improved conductance for vacuum pumping on the cathode. Computer simulation models have been used to optimize the RF parameters with two principal goals: first to minimize the required RF power; second to reduce the peak surface field relative to the field at the cathode in order to suppress field emitted electron bombardment. The beam properties have been simulated initially using PARMELA. Vacuum and other practical issues for implementing this design are discussed.
- Published through SciTech Connect.
Presented at 2006 Linear Accelerator Conference (LINAC 06), Knoxville, Tennessee, 21-25 Aug 2006.
Miller, R.A.; Colby, E.R.; Wang, J.W.; Lewellen, J.W.; Clendenin, J.E.
- Funding Information:
View MARC record | catkey: 14684340