PROCEDURE FOR SETTING UP THE TRANSFER LINES FOR THE SNS [electronic resource].

Published:: Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 2002.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description:: 3 pages : digital, PDF file
Additional Creators:: Brookhaven National Laboratory, United States. Department of Energy. Office of Energy Research, and United States. Department of Energy. Office of Scientific and Technical Information

Access Online

www.osti.gov

Availability

Finding items...

Restrictions on Access:

Free-to-read Unrestricted online access

Summary:

This paper describes the procedures for setting up the transfer lines for the Spallation Neutron Source (SNS). The High Energy Beam Transfer (HEBT) is about 170 meters long and has two achromat sections, an energy corrector cavity, energy spreader cavity, and transverse and longitudinal collimators. The Ring to Target Beam Transfer (RTBT) line is about 150 meters long has an achromat, transverse collimators and a beam spreader section. It will be shown that with the available diagnostics one can first characterize the incoming beam in both lines and then, with types and locations of the diagnostics and beam tuning ''knobs'', set up to deliver an output beam with the desired properties.

Report Numbers:

E 1.99:bnl--69299
bnl--69299

Subject(s):

Particle Accelerators

Other Subject(s):

Note:

Published through SciTech Connect.
08/19/2002.
"bnl--69299"
"39KC0200"
THE 21ST INTERNATIONAL LINAC CONFERENCE LINAC 2002, GYEONGJU (KR), 08/19/2002--08/23/2002.
LEE,Y.Y.; WEI,J.; RAPARIA,D.; WENG,W.T.

Funding Information:

AC02-98CH10886
86485

View MARC record | catkey: 14685298