Characterization of Longitudinal Impedances in Storage Rings Via Multibunch Effects [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 2002.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- vp : digital, PDF file
- Additional Creators:
- Stanford Linear Accelerator Center
United States. Department of Energy. Office of Energy Research
United States. Department of Energy. Office of Scientific and Technical Information
- In this paper we present two new techniques for frequency-resolved characterization of longitudinal impedances in storage rings. The first method is based on transient measurements of the growth rates and tune shifts of unstable coupled-bunch modes. In the second approach estimates of the impedances are obtained from analysis of the steady-state synchronous phases of the bunches for uneven fill patterns. These techniques are applicable to measurement of both fundamental and higher-order mode impedances and allow characterization of shunt impedances and quality factors of the HOMs. Methods presented here are complementary to lab bench measurements of RF cavities, in that the beam based measurements directly sense the physical impedance in the installed configuration. Experimental results from ALS and BESSY-II are presented showing the use of these techniques to measure complex impedances.
- Published through SciTech Connect.
- Type of Report and Period Covered Note:
- Funding Information:
View MARC record | catkey: 14685855