Survey of the Fermilab D0 detector collision hall [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 2001.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 1,125 Kilobytes pages : digital, PDF file
- Additional Creators:
- Fermi National Accelerator Laboratory
United States. Department of Energy. Office of Energy Research
United States. Department of Energy. Office of Scientific and Technical Information
- The Fermilab D0 detector was used for the discovery of the top quark during Run I in 1996. It had been upgraded to exploit the physics potential to be presented by the Main Injector and the Tevatron Collider during Run II. The upgrade of the D0 detector was fully commissioned on March 1, 2001, and thus marked the official start of the Run II experiment. The detector which weighs about 5500 tons, was assembled in the Assembly Hall. Prior to moving the detector into the Collision Hall, the existing survey monuments were densified in the Collision Hall with new monuments. This paper discusses the survey of the Collision Hall using a combination of the Laser Tracker, BETS, V-Stars, and other Optical systems to within the specified accuracy of ±0.5mm.
- Published through SciTech Connect.
Coordinate Measurement Systems Committee Conference, Albuquerque, NM (US), 08/13/2001--08/17/2001.
Babatunde O'Sheg Oshinowo.
- Funding Information:
View MARC record | catkey: 14686305