The Lattice for the 50-50 GeV Muon Collider [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 1998. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 10 pages : digital, PDF file
- Additional Creators:
- Fermi National Accelerator Laboratory, United States. Department of Energy. Office of Energy Research, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The lattice design of the 50-50 Gev muon collider is presented. Due to the short lifetime of the 50 GeV muons, the ring needs to be as small as possible. The 4 cm low betas in both planes lead to high betatron functions at the focusing quadrupoles and hence large chromaticities, which must be corrected locally. In order to maintain a low rf voltage of around 10 MV, the momentum-compaction factor must be kept to less than 10⁻² , and therefore the flexible momentum-compaction modules are used in the arcs. The dynamical aperture is larger than 6 to 7 rms beam size for ±5 rms momentum offset. Comments are given and modifications are suggested.
- Published through SciTech Connect., 02/01/1998., "fnal/c--98/060", " conf-971215--", "DE98052126", "KA HEP", 4. international conference on physics potential and development of muon-muon colliders, San Francisco, CA (United States), 10-12 Dec 1997., and Ng, K.-Y., Trbojevic, D.
- Funding Information:
View MARC record | catkey: 14688943