Actions for Equivalent circuit analysis of the RHIC injection kicker [electronic resource].
Equivalent circuit analysis of the RHIC injection kicker [electronic resource].
- Published
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 1997.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- 4 pages : digital, PDF file
- Additional Creators
- Brookhaven National Laboratory, United States. Department of Energy. Office of Energy Research, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- The RHIC injection kicker is built as a traveling wave structure in order to assure the required 95 nsec risetime in the deflection strength. The kicker is constructed from 14 cells, each 7.5 cm long, with alternating ferrite and high-permittivity dielectric sections. The cell structure permits an analysis of the electrical properties of the kicker using lumped L, C, and R circuit elements. Their values are obtained directly from impedance measurements of the full-length kicker, the inductance and shunt capacitance values by measuring the input impedance at 1 MHz with the output shorted and open, respectively. A lossy series resonance circuit in each cell is found to reproduce the measured input impedance of the terminated kicker up to ∼100 MHz. The validity of the equivalent circuit was confirmed by comparing the measured output current pulse shape time with that computed by the P-Spice program.
- Report Numbers
- E 1.99:bnl--64022
E 1.99: conf-970503--91
conf-970503--91
bnl--64022 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
07/01/1997.
"bnl--64022"
" conf-970503--91"
"DE97006667"
17. IEEE particle accelerator conference, Vancouver (Canada), 12-16 May 1997.
Hahn, H.; Ratti, A. - Funding Information
- AC02-76CH00016
View MARC record | catkey: 14689285