The PEP-II abort kicker system [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 1997. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 4 pages : digital, PDF file
- Additional Creators:
- Stanford Linear Accelerator Center, United States. Department of Energy. Office of Energy Research, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The PEP-II project has two storage rings. The HER (High Energy Ring) has up to 1.48 A of electron beam at 9 GeV, and the LER (Low Energy Ring) has up to 2.14 A of positron beam at 3.1 GeV. To protect the HER and LER beam lines in the event of a ring component failure, each ring has an abort kicker system which directs the beam into a dump when a failure is detected. Due to the high current of the beams, the beam kick is tapered from 100% to 80% in 7.33 uS (the beam transit time around the time). This taper distributes the energy evenly across the window which separates the ring from the beam dump such that the window is not damaged. The abort kicker trigger is synchronized with the ion clearing gap of the beam allowing for the kicker field to rise from 0-80% in 370 nS. This report discusses the design of the system controls, interlocks, power supplies, and modulator.
- Published through SciTech Connect., 07/01/1997., "slac-pub--7590", " conf-970503--189", "DE97007960", 17. IEEE particle accelerator conference, Vancouver (Canada), 12-16 May 1997., and Donaldson, A.; Kulikov, A. Lipari, J.; Lamare, J de.
- Funding Information:
View MARC record | catkey: 14689319