Email RIS file
Bookmark
Report an Issue

The 8-GeV transfer line injection into main ring [electronic resource].

Published
Washington, D.C. : United States. Dept. of Energy, 1995.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
24 pages : digital, PDF file
Additional Creators
Fermi National Accelerator Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Included in this report are a brief review of the design lattice of the 8-GeV beam transfer line and the Main Ring, the recent measurements on the 8-GeV line lattice function as well as that of the Main Ring at 8-GeV. The injection matching is a very important part of the MR operation. Mismatches such as energy, timing, or position are easily corrected because they cause oscillations which are visible on the Turn-By-Turn (TBT) TV monitor display. Mis-matches due to beta and dispersion functions are detected only by using the Flying Wire or by doing measurements during beam study. A new method which makes use of the available data from TBT hardware was used to obtain the beam phase space ellipse. Data taken from Main Ring at injection gives the beta function needed for transfer matching from 8-GeV line. The result of this measurement is also presented here.
Report Numbers
E 1.99:fnal--tm-1923
fnal--tm-1923
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
06/01/1995.
"fnal--tm-1923"
"DE95016697"
Yang, M.J.
Funding Information
AC02-76CH03000
View MARC record | catkey: 14693379