Log-ratio signal-processing technique for beam position monitors [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1993.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- 10 pages : digital, PDF file
- Additional Creators:
- Los Alamos National Laboratory
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- Two basic signal-processing techniques are presently in wide use for the processing of signals from beam position monitors (BPMs); difference-over-sum, and amplitude-modulation-to-phase-modulation (AM-PM) conversion. Difference-over-sum offers simplicity and low cost, but poor real-time normalized response and amplitude dynamic range. AM-PM offers fast real-time response and large dynamic range, but is costly and difficult to implement. Logarithmic-ratio processing, a technique using newly available inexpensive hybrid circuits, appears to offer the advantages of both, and the disadvantages of neither. This paper reviews the features techniques, and highlights the features of the log-ratio technique. Among the advantages of log-ratio is a beam-displacement response linearity that is superior to either difference-over-sum or AM-PM for circular-aperture BPMs.
- Published through SciTech Connect.
4. annual accelerator instrumentation workshop,Berkeley, CA (United States),27-30 Oct 1992.
- Funding Information:
View MARC record | catkey: 14694116