Email RIS file
Bookmark
Report an Issue

Magnetic field angle changes during manufacture and testing of SSC collider dipoles [electronic resource].

Published
Washington, D.C. : United States. Dept. of Energy, 1992.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
5 pages : digital, PDF file
Additional Creators
Fermi National Accelerator Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Measurements of the magnetic field angle along the length of collider dipole magnets are discussed. These superconducting magnets were built at Fermilab for the Superconducting Super Collider (SSC) by Fermilab and General Dynamics personnel. These measurements were made at four stages in the assembly and test sequence. The data show-that changes can occur both during installation in the cryostat and as a result of cold testing. Most of the changes during installation are correlated with the welding of the tie bar restraints. But the changes observed as a result of the cold testing can be attributed to changes in the magnetization of the iron laminations.
Report Numbers
E 1.99:fnal/c--92/291
E 1.99: conf-920802--40
conf-920802--40
fnal/c--92/291
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
10/01/1992.
"fnal/c--92/291"
" conf-920802--40"
"DE93004422"
Applied superconductivity conference,Chicago, IL (United States),23-28 Aug 1992.
Carson, J.; Schmidt, E.; Mazur, P.O.; Gourlay, S.; Orris, D.; Strait, J.; Yu, Y.; Lamm, M.J.; Wake, M.; Delchamps, S.W.; DiMarco, J.; Ogitsu, T.; Devred, A.; Zheng, H.; Bossert, R.; Kuchnir, M.; Kuzminski, J.; Koska, W.; Ozelis, J.; Hanft, R.; Bleadon, M.
Funding Information
AC02-76CH03000
View MARC record | catkey: 14694269