A damping ring design for future linear colliders [electronic resource].
- Published
- Menlo Park, Calif. : Stanford Linear Accelerator Center, 1989.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- Pages: 4 : digital, PDF file
- Additional Creators
- Stanford Linear Accelerator Center and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- In this paper we present a preliminary design of a damping ring for the TeV Linear Collider (TLC), a future linear collider with an energy of 1/2 to 1 TeV in the center of mass. Because of limits on the emittance, repetition rate and longitudinal impedance, we use combined function FODO cells with wigglers in insertion regions; there are approximately 22 meters of wigglers in the 155 meter ring. The ring has a normalized horizontal emittance, including the effect of intrabeam scattering, which is less than 3 /times/ 10/sup /minus/6/ and an emittance ratio of epsilon/sub x/ approx. 100epsilon/sub y/. It is designed to damp bunches for 7 vertical damping times while operating at a repetition rate of 360 Hz. Because of these requirements on the emittance and the damping per bunch, the ring operates at 1.8 GeV and is relatively large, allowing more bunches to be damped at once. 10 refs., 5 figs., 2 tabs.
- Report Numbers
- E 1.99:slac-pub-4912
E 1.99: conf-890335-115
conf-890335-115
slac-pub-4912 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
03/01/1989.
"slac-pub-4912"
" conf-890335-115"
"DE89011278"
13. particle accelerator conference, Chicago, IL, USA, 20 Mar 1989.
Raubenheimer, T.O.; Lee, M.J.; Ruth, R.D.; Morton, P.L.; Gabella, W.E.; Rivkin, L.Z. - Funding Information
- AC03-76SF00515
View MARC record | catkey: 14695007