Design and fabrication of 33 GHz high-gradient accelerator sections [electronic resource].
- Berkeley, Calif. : Lawrence Berkeley National Laboratory, 1988.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: 13 : digital, PDF file
- Additional Creators:
- Lawrence Berkeley National Laboratory and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- As part of a two-beam accelerator research program /similar to/33 GHz accelerator sections have been designed and fabricated by both the machined-and-brazed technique and the electroforming technique. These procedures are summarized in this paper. Special requirements included a filling time of about 14 ns, +- 1.25 ..mu..m dimensional tolerances, input VSWR less than or equal to1.10, radial vacuum pumping for each cell, and a capability for a 200--300 MV/m accelerating gradient. A 34-cavity, 2..pi../3 mode, quasi-constant gradient, v/sub p/ = c, /similar to/10 cm-long, disc-loaded waveguide structure design and chosen with optimized sidewall input/output iris couplers. 13 refs., 5 figs., 1 tab.
- Report Numbers:
- E 1.99:lbl-25368
E 1.99: conf-880695-63
- Other Subject(s):
- Published through SciTech Connect.
1. European particle accelerator conference, Rome, Italy, 7 Jun 1988.
Kelley, W.K.; Farmer, J.C.; Sessler, A.M.; Johnsen, H.A.; Hopkins, D.B.; Steffani, C.P.; Haimson, J.; Mecklenburg, B.
- Funding Information:
View MARC record | catkey: 14695236