Finding beam focus errors automatically [electronic resource].
- Published
- Menlo Park, Calif. : Stanford Linear Accelerator Center, 1987.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description
- Pages: 13 : digital, PDF file
- Additional Creators
- Stanford Linear Accelerator Center and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- An automated method for finding beam focus errors using an optimization program called COMFORT-PLUS. The steps involved in finding the correction factors using COMFORT-PLUS has been used to find the beam focus errors for two damping rings at the SLAC Linear Collider. The program is to be used as an off-line program to analyze actual measured data for any SLC system. A limitation on the application of this procedure is found to be that it depends on the magnitude of the machine errors. Another is that the program is not totally automated since the user must decide a priori where to look for errors. (LEW)
- Report Numbers
- E 1.99:la-ur-87-354
E 1.99: conf-870302-3
conf-870302-3
la-ur-87-354 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
01/01/1987.
"la-ur-87-354"
" conf-870302-3"
"DE87006049"
Particle accelerator conference, Washington, DC, USA, 16 Mar 1987.
Lee, M.J.; Kleban, S.D.; Clearwater, S.H. - Funding Information
- W-7405-ENG-36
AC03-76SF00515
View MARC record | catkey: 14695609