High voltage pulse cable and connector experience in the kicker systems at SLAC [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1991.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: (4 pages) : digital, PDF file
- Additional Creators:
- Stanford Linear Accelerator Center
United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- The SLAC 2-mile linear accelerator uses a wide variety of pulse kicker systems that require high voltage cable and connectors to deliver pulses from the drivers to the magnet loads. Many of the drivers in the SLAC kicker systems use cable lengths up to 80 feet and are required to deliver pulses up to 40 kV, with rise and fall time on the order of 20 ns. Significant pulse degradation from the cable and connector assembly cannot be tolerated. Other drivers are required to deliver up to 80 kV, 20 μs pulses over cables 20 feet long. Several combinations of an applicable high voltage cable and matching connector have been used at SLAC to determine the optimum assembly that meets the necessary specifications and is reliable. 14 refs., 3 figs., 1 tab.
- Published through SciTech Connect.
1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC), San Francisco, CA (USA), 6-9 May 1991.
Harris, K.; Mattison, T.; Donaldson, A.; Artusy, M.
- Funding Information:
View MARC record | catkey: 14695898