The linac and booster RF systems for a dedicated injector for SPEAR [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 1991. and Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: (3 pages) : digital, PDF file
- Additional Creators:
- Stanford Linear Accelerator Center, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- A 120 MeV, 2856 MHz, TW linac, with a microwave gun, alpha magnet, and chopper, has been built at SSRL as a preinjector for and along with a 3 GeV booster synchrotron ring. The resulting injector will be available on demand to fill SPEAR, which is a storage ring now dedicated to synchrotron light production. The linac sections were purchased from China, the XK-5 klystrons were obtained surplus from SLAC, the modulators are a variation on those at SLAC and were built by SSRL, the alpha magnet and chopper were designed and built at SSRL and the microwave gun was designed and built in collaboration with Varian Associates. The rf system for the booster ring is similar to those at SPEAR and PEP and was built by SSRL. Some of the interesting mechanical and electrical details are discussed and the operating characteristics of the linac and ring rf system are highlighted. 8 refs., 6 figs.
- Published through SciTech Connect., 05/01/1991., "slac-pub-5515", " conf-910505--68", "DE91012376", 1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC), San Francisco, CA (USA), 6-9 May 1991., and Wang, H.; Emery, L.; Sebek, J.; Miller, R.H.; Borland, M.; Nuhn, H.D.; Wiedemann, H.; Weaver, J.N.; Hettel, R.; Morales, H.; Baird, S., Baltay, M.; Safranek, J.; Chavis, C.; Genin, R.D.; Voss, J.; Youngmann, B.
- Funding Information:
View MARC record | catkey: 14695899