Actions for 10-MHz high-voltage modulator with pulse-width and repetition-rate agility [electronic resource].

Email RIS file
Bookmark
Report an Issue

10-MHz high-voltage modulator with pulse-width and repetition-rate agility [electronic resource].

Published
Los Alamos, N.M. : Los Alamos National Laboratory, 1985.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
Pages: 7 : digital, PDF file
Additional Creators
Los Alamos National Laboratory and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
Requirements for control and rapid switching of the proton beam at the Los Alamos Meson Physics Facility (LAMPF) are continually revised to support accelerator upgrades and modifications. A recent upgrade required the development of a 10-MHz high-voltage modulator for an electrostatic kicker with real-time control of pulse width and repetition rate over a range of four decades. The modulator must be capable of producing a voltage pulse across a capacitive load with a rise time of less than or equal to20 ns (10% to 90%). In addition the falling edge undershoot must be controlled to less than one part in 10/sup 3/. The paper describes in detail the circuit design philosophy, layout, and critical areas in system design.
Report Numbers
E 1.99:la-ur-85-2057
E 1.99: conf-850616-58
conf-850616-58
la-ur-85-2057
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
01/01/1985.
"la-ur-85-2057"
" conf-850616-58"
"DE85014117"
5. IEEE pulsed power conference, Washington, DC, USA, 10 Jun 1985.
Krausse, G.J.
Funding Information
W-7405-ENG-36
View MARC record | catkey: 14697885