Extraction for ISABELLE [electronic resource].
- Upton, N.Y. : Brookhaven National Laboratory, 1981.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Physical Description:
- Pages: 3 : digital, PDF file
- Additional Creators:
- Brookhaven National Laboratory and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The design specifications for ISABELLE, a superconducting proton storage ring facility under construction at Brookhaven National Laboratory call for circulating beam intensities of up to 6 x 10/sup 14/ protons at 400 GeV energy in each ring. The energy stored in the beam is 41 Megajoules, an order of magnitude more than what has been dealt with in the past. This beam energy cannot be safely disposed of within the confines of the ISABELLE lattice if damage to the dump or quenching of the superconducting magnets is to be avoided. Therefore the full intensity beam must be extracted from the storage rings under all circumstances of emergency or routine beam disposal. Beam losses in excess of 10/sup -3/ of the full beam can jeoardize the extraction components and lead to magnet quenching as well. In this note a conceptual design of the extraction system is summarized and the major constraints which lead to the parameters chosen are discussed.
- Report Numbers:
- E 1.99:bnl-29233
E 1.99: conf-810314-59
- Other Subject(s):
- Published through SciTech Connect.
Particle accelerator conference, Washington, DC, USA, 11 Mar 1981.
Claus, J.; Foelsche, H.
- Funding Information:
View MARC record | catkey: 14700034