Progress on the MICE Tracker Solenoid [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 2006.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Additional Creators:
- United States. Department of Energy
United States. Department of Energy. Office of Scientific and Technical Information
- This report describes the 400 mm warm bore tracker solenoid for the Muon Ionization Cooling Experiment (MICE). The 2.923 m long tracker solenoid module includes the radiation shutter between the end absorber focus coil modules and the tracker as well as the 2.735 m long magnet cryostat vacuum vessel. The 2.554 m long tracker solenoid cold mass consists of two sections, a three-coil spectrometer magnet and a two-coil matching section that matches the uniform field 4 T spectrometer solenoid into the MICE cooling channel. The two tracker magnets are used to provide a uniform magnetic field for the fiber detectors that are used to measure the muon beam emittance at the two ends of the cooling channel. This paper describes the design for the tracker magnet coils and the 4.2 K cryogenic coolers that are used to cool the superconducting magnet. Interfaces between the magnet and the detectors are discussed.
- Published through SciTech Connect.
2006 European Particle Accelerator Conference,Edinburgh, UK, June 2006.
Green, Michael A.; Lau, W.; Virostek, Steve P.; Yang, Stephanie Q.
Ernest Orlando Lawrence Berkeley NationalLaboratory, Berkeley, CA (US)
- Funding Information:
View MARC record | catkey: 14708454