Comparison of Edge Turbulence Imaging at Two Different Poloidal Locations in the Scrape-off Layer of Alcator C-Mod [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 2013.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
- Additional Creators:
- Princeton University. Plasma Physics Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- This paper describes 2-D imaging measurements of plasma turbulence made in the scrape-off layer of the Alcator C-Mod tokamak simultaneously at two different poloidal locations, one near the outer midplane and the other near the divertor X-point region. These images were made with radial and poloidal resolution using two gas puff imaging (GPI) diagnostics, which were not directly connected along a B field line. The turbulence correlation structure has a significantly different tilt angle with respect to the local flux surfaces for the midplane and X-regions, and a slightly different ellipticity and size. The time-averaged turbulence velocities can be different in the midplane and Xregions, even within the same flux surface in the same shot, and in most cases the fluctuations in poloidal velocity in these two regions were not correlated. These structures are partially consistent with a magnetic flux tube mapping model, and the velocities are compared with various poloidal flow models.
- Report Numbers:
- E 1.99:pppl-4864
- Other Subject(s):
- Published through SciTech Connect.
- Funding Information:
View MARC record | catkey: 14737198