Actions for Tritium Inventory in Aries-AT [electronic resource].
Tritium Inventory in Aries-AT [electronic resource].
- Published
- Washington, D.C. : United States. Dept. of Energy, 2001.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Additional Creators
- Idaho National Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access
- Free-to-read Unrestricted online access
- Summary
- This report documents an investigation into the tritium inventory expected in the ARIES-AT fusion reactor. ARIES-AT features silicon carbide fibers in a silicon carbide matrix as its primary construction. It uses the same fusion power core as the previous ARIES-RS. Based on experimental results of several researchers, consideration was given to swelling, sputtering, film coatings, erosion, and implantation. Estimates were made of tritium inventory using the TMAP4 code. About 700 g of tritium may be expected in the machines, two thirds of which would reside in the first wall. Under assumed accident conditions that involve firs wall temperatures up to 1000°C, evolution of retained tritium may be expected to vary from 0.8 to nearly 40 percent depending on the temperature of the first wall.
- Report Numbers
- E 1.99:ineel/ext-01-00306
ineel/ext-01-00306 - Subject(s)
- Other Subject(s)
- Note
- Published through SciTech Connect.
02/01/2001.
"ineel/ext-01-00306"
Longhurst, Glen Reed. - Funding Information
- DE-AC07-99ID-13727
View MARC record | catkey: 14739891