Actions for Comparison of Machining with Long-Pulse Green and Ultrashort Pulse Lasers [electronic resource].

Email RIS file
Bookmark
Report an Issue

Comparison of Machining with Long-Pulse Green and Ultrashort Pulse Lasers [electronic resource].

Published
Washington, D.C. : United States. Dept. of Energy, 2001.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
PDF-FILE: 35 ; SIZE: 0.8 MBYTES pages
Additional Creators
Lawrence Livermore National Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
(1) LLNL measured the material removal rate from stainless steel, silicon carbide, rhenium, N5, hastalloy X, and titanium as a function of pulse fluence at a wavelength of 810 nm for pulse durations of 150 fs, 1.5 ps, 20 ps, and 500 ps. The spot size of the beam used was 150 microns in diameter and the nominal material thickness was 1-2 mm. These experiments were performed on the existing 1 kHz laser system. Holes of different penetration depths were obtained to ascertain change in removal rate as a function of depth. Measurements included electron microscopy of selected samples. (2) The experiments in I were repeated for all materials but select pulse durations with the sample in a vacuum of base pressure 10 mTorr to determine if hole quality and ablation rate is improved. (3) LLNL measured material removal rate from stainless steel, silicon carbide, rhenium, N5, hastalloy X, and titanium as a function of pulse fluence at a wavelength of 532 nm for pulse duration at 200 ns. The spot size of the beam used was 200 microns in diameter and the material thickness was the same as in task I. Holes of different penetration depths were obtained to ascertain changes in removal rate as a function of depth.
Report Numbers
E 1.99:ucrl-cr-145536
ucrl-cr-145536
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
05/18/2001.
"ucrl-cr-145536"
Stuart, B C; Wynne, A E.
Funding Information
W-7405-ENG-48
View MARC record | catkey: 14741577