Development of a new error field correction coil (C-coil) for DIII-D [electronic resource].
- Published:
- Washington, D.C. : United States. Dept. of Energy. Office of Energy Research, 1995.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy. - Physical Description:
- 8 pages : digital, PDF file
- Additional Creators:
- General Atomic Company, United States. Department of Energy. Office of Energy Research, and United States. Department of Energy. Office of Scientific and Technical Information
Access Online
- Restrictions on Access:
- Free-to-read Unrestricted online access
- Summary:
- The C-coil recently installed on the DIII-D tokamak was developed to reduce the error fields created by imperfections in the location and geometry of the existing coils used to confine, heat, and shape the plasma. First results from C-coil experiments include stable operation in a 1.6 MA plasma with a density less than 1.0 × 10¹³ cm{sup −3}, nearly a factor of three lower density than that achievable without the C-coil. The C-coil has also been used in magnetic braking of the plasma rotation and high energy particle confinement experiments. The C-coil system consists of six individual saddle coils, each 60° wide toroidally, spanning the midplane of the vessel with a vertical height of 1.6 m. The coils are located at a major radius of 3.2 m, just outside of the toroidal field coils. The actual shape and geometry of each coil section varied somewhat from the nominal dimensions due to the large number of obstructions to the desired coil path around the already crowded tokamak. Each coil section consists of four turns of 750 MCM insulated copper cable banded with stainless steel straps within the web of a 3 in. x 3 in. stainless steel angle frame. The C-coil structure was designed to resist peak transient radial forces (up to 1,800 Nm) exerted on the coil by the toroidal and ploidal fields. The coil frames were supported from existing poloidal field coil case brackets, coil studs, and various other structures on the tokamak.
- Report Numbers:
- E 1.99:ga--a22223
E 1.99: conf-950905--40
conf-950905--40
ga--a22223 - Subject(s):
- Other Subject(s):
- Note:
- Published through SciTech Connect.
12/01/1995.
"ga--a22223"
" conf-950905--40"
"DE97003831"
16. IEEE/NPSS symposium on fusion engineering, Champaign, IL (United States), 1-5 Oct 1995.
Robinson, J.I.; Scoville, J.T. - Funding Information:
- AC03-89ER51114
View MARC record | catkey: 14743923