Actions for Design and fabrication of the MFTF-B magnet system [electronic resource].

Email RIS file
Bookmark
Report an Issue

Design and fabrication of the MFTF-B magnet system [electronic resource].

Published
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 1985.
Physical Description
Pages: 6 : digital, PDF file
Additional Creators
Lawrence Livermore National Laboratory and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
The MFTF-B superconducting magnet system consists of 40 NbTi magnets and two Nb/sub 3/Sn magnets. General Dynamics (GD) designed all magnets except for the small trim coils. GD then fabricated 20 NbTi magnets, while LLNL fabricated 20 NbTi magnets and two Nb/sub 3/Sn magnets. The design phase was completed in February 1984 and included the competitive procurement of magnet structural fabrication, superconductor, G-10CR insulation, support struts and bearings, vapor-cooled leads, and thermal shields for all magnets. Fabrication of all magnets was completed in March 1985. At GD, dual assembly lines were necessary during fabrication in order to meet the aggressive LLNL schedule. The entire magnet system has been installed and aligned at LLNL, and Tech Demo tests will be performed during September-November 1985.
Report Numbers
E 1.99:ucrl-15718
ucrl-15718
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
09/01/1985.
"ucrl-15718"
"DE86000742"
Kozman, T.A.; Tatro, R.E.
General Dynamics Corp., San Diego, CA (USA). Space Systems Div.
Funding Information
W-7405-ENG-48
View MARC record | catkey: 14752226