Thermodynamic Properties Of Alkali Species In Coal Based Combined Cycle Power Systems [electronic resource].
- Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2002.
- Physical Description:
- vp : digital, PDF file
- Additional Creators:
- United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The aim of this project is to support the development of a concept for a successful alkali removal. Two strategies are possible: optimizing the alkali retention potential of the coal ash slag in the combustion chamber and the liquid slag separators and separate alkali removal with solid sorbents (getters) at temperatures below 1450 C. Therefore in a first step the alkali partial pressure over coal ash slag should be determined in order to get information about the retention potential of the slag. The influence of additives on the retention potential of the slag should be investigated. The measurements should show if the alkali partial pressure over the slag is generally low enough in case of thermodynamic equilibrium. In case of too high alkali partial pressures a separate alkali removal is needed. Therefore in a second step commercial sorbent materials should be investigated concerning their sorption potential for alkalis. To get information about the influence of getter components on the sorption potential some mixtures of pure components, predicted by thermodynamic modeling to be most effective, should be investigated.
- Published through SciTech Connect., 09/20/2002., 5th International Symposium on Gas Cleaning at High Temperatures, Morgantown, WV (US), 09/17/2002--09/20/2002., Wolf, K.J.; Singheiser, L.; Hilpert, K.; Moeller, M.; Willenborg, W.; Fricke, C.; Prikhodovsky, A., and Research Center Juelich, IWV-2, Juelich (DE)
View MARC record | catkey: 14758179