Email RIS file
Bookmark
Report an Issue

Determining equivalent damage loading for full-scale wind turbine blade fatigue tests [electronic resource].

Published
Washington, D.C. : United States. Dept. of Energy, 2000.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy.
Physical Description
vp : digital, PDF file
Additional Creators
United States. Department of Energy and United States. Department of Energy. Office of Scientific and Technical Information
Access Online

Availability

I Want It
I Want It

Finding items...

Restrictions on Access
Free-to-read Unrestricted online access
Summary
This paper describes a simplified method for converting wind turbine rotor design loads into equivalent-damage, constant-amplitude loads and load ratios for both flap and lead-lag directions. It is an iterative method that was developed at the National Renewable Energy Laboratory (NREL) using Palmgren-Miner's linear damage principles. The general method is unique because it does not presume that any information about the materials or blade structural properties is precisely known. According to this method, the loads are never converted to stresses. Instead, a family of M-N curves (moment vs. cycles) is defined with reasonable boundaries for load-amplitude and slope. An optimization program iterates and converges on the constant amplitude test load and load ratio that minimizes the sensitivity to the range of M-N curves for each blade section. The authors constrained the general method to match the NedWind 25 design condition for the Standards, Measurements, and Testing (SMT) blade testing pro gram. SMT participants agreed to use the fixed S-N slope of m = 10 from the original design to produce consistent test-loads among the laboratories. Unconstrained, the general method suggests that slightly higher test loads should be used for the NedWind 25 blade design spectrum. NedWind 25 blade test loads were computed for lead-lag and flap under single-axis and two-axis loading.
Report Numbers
E 1.99:nrel/cp-500-27510
nrel/cp-500-27510
Subject(s)
Other Subject(s)
Note
Published through SciTech Connect.
03/13/2000.
"nrel/cp-500-27510"
19th American Society of Mechanical Engineers (ASME) Wind Energy Symposium, Reno, NV (US), 01/10/2000--01/13/2000.
Musial, W.; Freebury, G.
National Renewable Energy Lab., Golden, CO (US)
Funding Information
AC36-99GO10337
View MARC record | catkey: 14989929