Water-Pressure Distribution on Seaplane Float

Finding items...

Restrictions on Access: Unclassified, Unlimited, Publicly available.
Free-to-read Unrestricted online access
Summary: The investigation presented in this report was conducted for the purpose of determining the distribution and magnitude of water pressures likely to be experienced on seaplane hulls in service. It consisted of the development and construction of apparatus for recording water pressures lasting one one-hundredth second or longer and of flight tests to determine the water pressures on a UO-1 seaplane float under various conditions of taxiing, taking off, and landing. The apparatus developed was found to operate with satisfactory accuracy and is suitable for flight tests on other seaplanes. The tests on the UO-1 showed that maximum pressures of about 6.5 pounds per square inch occur at the step for the full width of the float bottom. Proceeding forward from the step the maximum pressures decrease in magnitude uniformly toward the bow, and the region of highest pressures narrows toward the keel. Immediately abaft the step the maximum pressures are very small, but increase in magnitude toward the stern and there once reached a value of about 5 pounds per square inch. (author)
Collection: NASA Technical Reports Server (NTRS) Collection.
Note: Document ID: 19930091359.
Accession ID: 93R20649.
NACA-TR-290.
Terms of Use and Reproduction: No Copyright.

View MARC record | catkey: 15436562

Actions for Water-Pressure Distribution on Seaplane Float