The new downwash measurements behind a tapered wing with parallel center section described in the present report can be brought into good agreement with theoretical calculations if made on the basis of not-rolled-up vortex sheet and allowance is made for the lowering of the sheet. The test values are about 1 degree higher than the "upper limit" established for it, as against approximately 0.5 degrees in the earlier tests behind a rectangular and elliptical wing. The measurements on lateral axes, especially if lying below the wing on a level with the vortex train, disclosed in accord with the lift distribution, a marked change in angle over the span of the tail in contrast to the rectangular and elliptical wing.
