JPRS Report. Science & Technology. USSR--Materials Science [electronic resource].
- [Arlington Va.] : [publisher not identified], 1990.
- Physical Description:
- 36 pages
- Science and technology. USSR: materials science (1987-1991) ; JPRS-UMS-90-006
- Multipurpose Optimization of Elastic and Heat-Physical Properties of Fiber Composites by A. F. Kregers, Yu. G. Melbardis, M. F. Rektinsh -- Factors Influencing Compressive Strength of Layered Composites and Methods of Increasing It by G. M. Gunyayev, I. G. Zhigun, V. A. Polyakov, V. V. Mikhaylov -- Nonlinear Deformation and Stability of Two-Layer Spherical Segments Exposed to External Pressure Considering Delamination by V. A. Bazhenov, Yu. L Dinkevich -- Load-Bearing Capacity of Multilayer Compounds Tubular Rods of Composite Materials. 1. Rods Compound in Perimeter and Radius by V. V. Khitrov, V. A. Lapotkin, A. V. Sukhanov -- Optimization of Layered Systems by Yu. S. Urzhumtsev, A. G. Adamovich, M. A. Kanibolotskiy -- Iterative Method of Designing Homogeneous and Multilayered Envelopes of Rotation of Highly Elastic Materials by V. M. Akhundov -- New Finite Element for Studying Stability of Three-Layer Rod of Composite Material by M. M. Kishkilov -- Diagnosis of Strength of Spirally Wound Shells and Its Relationship to Composite Mechanics by S. S. Abramchuk -- Effect of Vacuum Heat-Treatment Practice on Corrosion Resistance of Alloy 06KhN28MDT Centrifugally Cast Tubes by L. P. Shchesno, A. G. Pigulevskaya, A. I. Sukhomlin, A. A. Verbitskaya, V. P. Vlasova, A. M. Babchenko, A. I. Kistanov -- Effect of Chemical-Thermal Treatment of Chromium-Containing Steels and Alloys on Their Corrosion Resistance in Nitrogen Tetroxide by V.P. Isakov, A.A. Antonov, L.V. Zharkova -- Modeling of Corrosion-Electrochemical Behavior of Binary Titanium Alloys by I. V. Kasatkina, N.D. Tomashov, A. I. Shcherbakov -- Corrosion-Electrochemical Properties of Oxide-Carbide and Oxide-Nitride Coatings on Titanium Obtained in Electrolyte Plasma by N. D. Tomashov, T. V. Chukalovskaya, I. L. Medova, V. N. Duradzhi, G. M. Plavnik -- Comprehensive Assessment of Efficiency of Corrosion Inhibitors by M. A. Zubareva, V. M. Shkolnikov, N. A. Litvinova, Zh. Sh. Yerukhimovich, E. V. Kalinina -- Predicting Sea-Water Corrosion of Steel From Its Physical and Chemical Properties by B. B. Chernov -- Atmospheric Corrosion of Zinc and Cadmium Coatings in Tropical Climate of Vietnam by Din Vuy Vu, A.A. Mikhaylov, Tkhi Shan Fam -- Heat Treatment of VT22 Titanium Alloy by V. N. Moiseyev, Yu. I. Zakharov, Yu. G. Krillov, Yu. M. Dolzhanskiy, T. G. Danilina -- Change of Lattice Period of-Phase During Isothermal Annealing of Titanium Alloys by M. V. Maltsev, N. V. Petrikova -- Solid-State Synthesis of Lanthanum Chromite by S. A. Suvorov, A. Yu. Nikiforov -- Measurement of Ultimate Tensile Strength of Ceramics in Atmosphere of Combustion Products at Temperatures Up to 2500 K by O. B. Bakunov, Ye. P. [Illegible], Yu. I. Chubarov -- Production of High-Purity Titanium Dioxide For Hard-Alloys Industry by L. G. Terekhova, A. I. Lystsov, V. I. Tsvetkow, A. N. Myasnoy -- Classification of WC Powders For Production of Hard Alloys by T. B. Gorbacheva, G. L. Krasnova, T. A. Rakoch, I. N. Chaporova -- Improvement of Standards For Rolled Stock of Nonferrous Metals by Yu. M. Leybov, V. A. Chervonenkov -- Dynamic Compaction of Ceramic-Base Composite Materials by A. A. Betman, O. G. Yepanchintsev, Yu. I. Zvezdin, A. A. Deribas, V. F. Nesterenko, S. A. Pershin, V. D. Natsik, Ye. D. Tabachnikova -- Corrosion Cracking of (Alpha + Beta)-Titanium Alloys As a Function of Temperature-Time Parameters of Heat and Plastic Treatment by Yu. D. Khesin, L. A. Ivanova, A. I. Igolkin, S. N. Petrov -- Acoustic Emission in Composite and Ceramic Materials by O. V. Lyashenko, V. M. Perga, I. N. Salivonov, T. G. Shevchenko., Testing Alloy Steel at Low Temperatures by Method of Acoustic Emission by I. V. Parkhomenko, M. A. Yaremenko, Yu. V. Zhbanov, V. I. Kalemanov, A. P. Kozub, S. A. Voronin, V. P. Starikov, Ye. O. Paton -- Characteristics of Joint Formation During Diffusion Welding of Corundum Ceramic With Aluminum Filler by L. N. Larikov, M. N. Belyakova, V. N. Zamkov, L. S. Kireyev, M.M. Struina, N. A. Chaban, Ye. O. Paton -- Diffusion Welding of Alumina Ceramic With Zn-Al or Al-Cu Alloy Fillers by L. S. Kireyev, M. M Struina, N. A. Chaban, Ye. O. Paton, L. N. Larikov, M. N. Belyakova -- Physical Processes During Silicon-to-Glass Welding in Electric Field by N. N. Khomenko -- Electric Conductor-Explosion Welding of Ceramics by K. A. Yushchenko, V. S. Nesmikh, I. V. Dubovetskiy, I. V. Kushchenko, Ye. O. Paton -- Welding of Si₃N₄ Ceramic By Hot Pressing by T. V. Shevchuk, T. N. Kushnareva, G. N. Gordan, Ye. O. Paton, V. A. Kotko, O. A. Babiy -- Brazing Si₃N₄ Ceramic to Metals by V. K. Kolesnikov, N. A. Bareskov, A. F. Belkov, I. L. Pozdnyakova -- Physical-Chemical Processes in Hollow Glass Microsphere Technology by V. V. Budov, D. I. Mendeleyev -- Laser Technologies for Processing Ceramic Materials (Review) by Ye. M. Markov, Yu. I. Voronezhtsev, V. A. Goldade -- Elastic Properties of Metal Ceramic Based on Tungsten Monocarbide at Low Temperatures by V. L. Ulyanov, A. A. Botaki, V. P. Nesterenko, I. P. Chernov, S. M. Kirov -- Evolution of MgCr₂O₄-Ceramic Structure and Phase Content by V. Kh. Kuliyev, R. Ya. Popilskiy, D. I. Mendeleyev -- Strength of Quartz Ceramic After Thermal Cycling by A. M. Akhyan -- Silica-Phosphate Quartz Ceramic by M. T. Melnik, Nguen Din Ngi -- Radiative Changes in Young's Modulus of Electroceramics by V.L. Ulyanov, E.V. Pozdeyeva, S.M. Kirov -- Alkali Glass for Fiber Manufacture by S. A. Zaytseva, Yu. I. Kolesov, S. Z. Volskaya -- Ceramic Diaphragm For Electrolysis by S. A. Polyakov, S. A. Belmozhin -- Strength of Quartz Ceramic by F. Ya. Boroday -- Use of Rare-Earth Tailings in Manufacture of High-Transparence Glass by Z. P. Beregovaya, Ye. A. Shevchenko, A. S. Zolotareva -- Mechanical Strength of Optical Fiber With Coating of Epoxy Acrylate Coating Hardened By Ultraviolet Radiation by V. F. Chuprakov, S. V. Koryshev, N. M. Kononova, P. B. Baskov -- Effectiveness of Composite Casting For Enameling by F. D. Obolentsev, Ye. I. Litvinova, O. Ya. Savchenko -- Compound Pulsed-Static Pressing of Industrial-Grade Ceramics by I. I. Molochkov, M. R. Leruma, V. A. Mironov, U. Ya. Sedmalis -- Use of Laser Radiation For Flashing Porcelain Surfaces by I. V. Aleksandrov, V. M. Strakhov, Yu. P. Udalov -- Use of Ceramic Material for Formation of Welding Seam by G. Z. Komskiy, H. V. Kolotnyy, V. D. Boguslavskiy, V. N. Kovalchuk -- Mechanical Properties of Quartz Ceramic at Operating Temperature by V. G. Panteleyev, N. V. Klyucheva, A. V. Struy, K. S. Ramm, S. I. Vavilov -- Microstructure of Black Pigments on Basalt Base by A.I. Shushanashvili, N.G. Rukhadze, M.N. Gogidze, L.K. Alaverdova, L.K. Tedeishvili -- Electrochemical Synthesis of Selenium Hydride by O.A. Glushachenko, L.F. Kozin, F.D. Manilevich, L.S. Novikova -- Determination of Oxygen in High-Purity Germanium by Lithium Precipitation by G. G. Devyatykh, Yu. A. Nechuneyev, M. Yu. Pyatov, I. V. Kiselev -- Analysis of Structure Perfection of Pb₁₋xSnxSe Single Crystals Grown From Vapor Phase by N. I. Dolotov, V. A. Moshnikov, V. V. Tomayev, K.L. Khetagurov -- Viscosity Change During Melting of Solids by Ye. B. Yakovlev -- Description of Kinetics of Solid-Phase Diffusional-Amorphization Reactions by A. M. Gusak, A. V. Nazarov -- Structure of Rapidly Quenched Steel R18 at the Secondary-Hardening Stage by V. Ye. Vaganov, L. K. Mikhaylova, V. I. Kiriyenko, N. G. Shapoloshnikov, L.A. Kudryavtseva -- Effect of Low-Temperature Strain on the Phase Composition of the Ti-45 wt.% Nb Alloy by V. A. Lototskaya, V. Ya. Ilichev, A. I. Prokhvatilov, A. P. Isakina -- Iteration Method in Kinetics of Condensation of Thin Films by A. V. Osipov., Volume Changes in Liquid-Phase Sintering of Aluminum-Magnesium Powder Compacts by N. S. Timofeyev, A. P. Savitskiy -- Features of Formation of Interparticle Contacts in Sintering of Porous Molybdenum-Copper Composites by A. G. Kostornov, V. P. Semenets -- Effect of Powder Properties and Compaction and Sintering Conditions on the Structure of Porous Niobium. 1. Effect of Powder Properties and Compaction Conditions on the Formation of Porous Structure of Niobium Material by Yu. V. Levinskiy, A. B. Zaytsev, Ya. M. Polyakov, Yu. B. Patfikeyev -- Structure and Properties of Chromium Powder Compacts Sintered by Electrical-Contact Heating by L. O. Andrushchik, O. N. Balakshina, S. P. Oshkaderov, Ye. N. Severyanina -- Properties of Titanium Nitride-Diboride Composites Prepared From Very Fine Powders by Ya. A. Krastinsh, I. V. Zalite, T. N. Miller -- Structure and Properties of Gas-Flame Coatings From Iron-Base Self-Fluxing Powder by I. N. Gorbatov, A.G. Zherdin, Yu. K. Pokrovskiy, O. D. Timoshenko, S. Yu. Koshkina, I. V. Fedorenko, T. Ye. Gerus -- Reactions of Mixtures of Tungsten and Silicon Oxides With Carbon by V. S. Sinelnikova, S. P. Gordiyenko, V. A. Melnikova, O. I. Popova, O. T. Khorpyakov -- Structure and Hydrodynamic and Strength Properties of Porous Materials Made From Corrosion-Resistant Steels by Z. A. Vasilevskaya, P. A. Vityaz, V. M. Kaptsevich, V. K. Sheleg, A. N. Sorokina, S. A. Bedenko, V. V. Savich, A. Ye. Galkin -- Defects Arising in Industrial Production of Powder-Compact Articles by Yu. G. Dorofeyev, A. T. Mamedov, G. A. Dreyev, V. V. Rumyantsev -- Contact Melting in Crossed Electric and Magnetic Fields by I. M. Temukuyev, M. L Balde, P. A. Siventsev -- Influence of Aluminum Content on Properties of High Manganese Steel Type [Illegible] by M. I. Kurbatov, A. S. Nosenko, E. G. Zemka, Ya. P. Protsenko -- Phase Composition and Thermal Stability of Cast Heat-Resistant Nickel Alloy With Silicon by V. V. Sidorov, G. I. Morozova, N. V. Petrushin, Ye. A. Kuleshova, A. M. Kulebyakina, L. I. Dmitriyeva -- Formation of Iron-Nickel Coating Structure Depending on Electrocrystallization Conditions by I. M. Kovenskiy, V. V. Povetkin -- Oxidation and Compaction of Diamond Powder Produced From Hydrocarbons by O. A. Voronov, A. A. Kaurov, Ye. S. Chebotareva -- Effect of Thermal Resistance of Contact on Thermal Conductivity of Binary Composite Materials With Diamond Component, Part 2 by V. I. Nepsha, V. R. Grinberg, Yu. A. Klyuyev, N. A. Kolchemanov, V. V. Zhuravlev -- New Abrasive Material Made of Kiborite by A. A. Shulzhenko, Yu. I. Nikitin, S. M. Uman, S. A. Bozhko, N. P. Bezhenar -- Improving Performance and Reliability of Ceramic Cutting Tool by Yu. G. Kabaldin, O. B. Kovalev, A. A. Shepelev -- Wear Resistance of Slide Bearings With Alumina Coating by A. V. Parkhomenko, I. M. Komskaya, K. A. Cherepanov, A. V. Chernyshov, A. V. Galkov, A. A. Ivanenko -- Dependence of Diamond Crystal Growth Pattern on Wettability of Diamond Crystal Facets By Metal Melts by Yu. V. Naydich, V. M. Perevertaylo, O. B. Loginova -- Material Containing Cubonit With Nickel Binder Produced By High-Speed Sintering Under Pressure by V. P. Pereyaslov, L. M. Bologova, M. N. Voloshin, V. P. Kolomiyets, P. I. Bologov -- Effect of Thermal Resistance of Contact on Thermal Conductivity of Binary Composite Materials With Diamond Component, Part 1 by V. I. Nepsha, V. R. Grinberg, Yu. A. Klyuyev, N. A. Kolchemanov, V. V. Zhuravlev -- Thermal Conductivity and Structural Characteristics of Cubic Polycrystalline Boron Nitride by A. P. Podoba, T. T. Ositinskaya, A. V. Belyankina, I. A. Petrusha -- High-Pressure Sintering of Titanium Diboride by A. M. Mazurenko, V. S. Urbanovich, A. I. Olekhnovich -- Using Tungstenless Hard Alloy Tool For Machining Sprayed Coatings by N. V. Spiridonov, G. Ya. Belyayev, E. A. Kolchanov -- Deformability of TiNx Powders Under High Pressure and Impact Loads by A. Ye. Kravchik, V. S. Neshpor, S. S. Ordanyan, Lensovet -- Effect of Alloying on the Surface Composition and Oxidation Resistance of Rapidly Quenched Alloys Based on the Co₈₀B₂₀ System by V. V. Nemoshkalenko, A. P. Shpak, S. I. Latypov, N. S. Kobzenko, A. G. Dmitriyev., and Combined Use of Laser Processing and Surface Plastic Deformation After Electric-Spark Alloying of Steel With Chromium by G. A. Beresnev, V. P. Bratilov, V. V. Pepelyayev, S. V. Pertsev, K. V. Shestakov -- Some Specifics of Vacuum Electric-Arc Application of Coatings of Ti-Si Alloy in Nitrogen by Zh. A. Mrochek, B. A. Eyzner, I. A. Ivanov, A. A. Tomchenko, V. I. Ivashneva, Ye. V. Mochaylo, V. M. Konkov -- Influence of Magnetic Field on Physical and Chemical Properties of Aviation Fuels by I. G. Tretyakov, V. A. Balenko -- Heat Treatment of Iron-Alloy Products By Beam of High-Energy Electrons by G. M. Lonchin, Ye. S. Machurin, B. P. Molin, M. Ye. Yevsevyev -- Influence of Scanning During Laser Surfacing by A. N. Grechin, I. A. Zyabrev, I. A. Likhachev.
- Report Numbers:
- PREX 7.22/10:
- Document Date: 12/24/1990.
- Reproduction Note:
- Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
- Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21277816